{"product_id":"emf-7467l-1-7460-1-kit-oversized-2010-13-ram-2500-3500","title":"EMF 7467L.1-7460.1 KIT- OVERSIZED 2010-13 Ram 2500\/3500","description":"\u003cp\u003eComes in a set of 4 (2 uppers, 2 lowers and install tools)\u003c\/p\u003e\n\u003cp\u003eThese ball joints fit:\u003c\/p\u003e\n\u003cp\u003e2010-2013 Dodge Ram 2500\/3500 4WD\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**NOTE**\u003c\/strong\u003e The only difference in these Ball Joints from the 2003-2009 set is that the lower ball joints contain a Pin that is approximately 1\/8\" longer to avoid Lower ball joints sitting too deep in the knuckle and rubbing on the boots.\u003c\/p\u003e\n\u003cp\u003eAlot of the knuckles manufactured for the 2010-2013 Ram Trucks had slightly deeper tapered holes so the pins would sit too deep and the lower ball joint would rub. To fix this , we made a slightly longer lower pin so they will sit higher in the knuckle. EMF is the only manufacturer to do this. These lower ball joints can also be used in the 03-09 to fix this problem as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEMF OVERSIZED BALL JOINTS ARE ALMOST EXACTLY THE SAME AS OUR REGULAR SIZE BALL JOINTS IN ALL ASPECTS - EXCEPT THEY HAVE A 5-6 THOU LARGER HOUSING THAN OUR REGULAR SIZE TO ACCOMMODATE THOSE HOLES THAT HAVE BEEN STRETCHED OUT BY FREQUENT CHANGES OR USING A KNURLED BODY BALL JOINT THAT NEED A TIGHTER FIT.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e**\u003cstrong\u003eSET OF 4**  OVERSIZED EMF Dodge Ram 10-13 4WD Upper and Lower Ball Joint Kit\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eUpper Ball Joints Fit:\u003c\/em\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2006-2008 Dodge Ram 1500 4WD MEGA CAB ONLY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2003-2013 Dodge Ram 2500\/3500 4WD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2011-2013 Dodge Ram 2500HD \/ 3500HD\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eLower Ball Joints Fit: \u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2010-2013 Dodge Ram 3500HD 4WD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2010-2013 Dodge Ram 2500HD 4WD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eWHY DO WE HAVE A SPLIT YEAR FOR 2003-2009 AND 2010-2013 WHEN ALL OTHER MANUFACTURERS ARE THE SAME FROM 2003-2013?\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHere at EMF we like to make things harder for us by adding more sku's and parts to machine, to make it easier for you! \u003c\/p\u003e\n\u003cp\u003eWe noticed that the lower ball joint on a 2010-2013 Ram 2500\/3500 would sit in the tapered knuckle hole deeper on most of the trucks, which would result in the ball joint rubbing on the boots.  So we made a lower BJ pin that is 1\/8\" longer to allow the Ball Joint to sit a bit higher in the knuckle and avoid any boot rubbing.  This is just how awesome EMF is.\u003c\/p\u003e\n\u003cp\u003eCan these be used in a 2003-2009 Ram that has this problem of boot rubbing?  Absolutely!  The taper is exactly the same, it is just the height above the taper that is longer. \u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"248\" width=\"248\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1393\/4337\/files\/Long_Pin_7a5569f6-f952-4b2f-a5e4-83a089626b8a.jpg?v=1754935374\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Included in the EMF Ball Joint Kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Pair of Upper Ball Joints\u003c\/li\u003e\n\u003cli\u003e1 Pair of Lower Ball Joints\u003c\/li\u003e\n\u003cli\u003eInstall Nuts\u003c\/li\u003e\n\u003cli\u003eInstall Washer \u0026amp; Cup (To avoid damaging the cap and the ring when pressing the ball joint into the knuckle)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 Pair of Dodge Intermediate Shaft Bushings (To remove any wander felt in the steering column – Mandatory to install for all Ball Joint Sets)\u003c\/li\u003e\n\u003cli\u003eInstructions \u0026amp; an EMF Sticker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eHOUSING MEASUREMENTS:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSTOCK FACTORY UPPER BALL JOINT SIZE – 1.8975”\u003c\/p\u003e\n\u003cp\u003eEMF UPPER BALL JOINT REGULAR BODY SIZE – 1.9” (+.001)\u003c\/p\u003e\n\u003cp\u003eEMF\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eOVERSIZED\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUPPER BALL JOINT SIZE - 1.905\" (+.001)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSTOCK FACTORY LOWER BALL JOINT SIZE – 1.8095”\u003c\/p\u003e\n\u003cp\u003eEMF LOWER BALL JOINT REGULAR BODY SIZE – 1.8115” (+.001)\u003c\/p\u003e\n\u003cp\u003eEMF\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eOVERSIZED\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLOWER BALL JOINT SIZE - 1.8185\" (+.001)\u003c\/p\u003e","brand":"Sheridan Driveline","offers":[{"title":"Default Title","offer_id":52809072509228,"sku":"7467L.1-7460.1 KIT","price":675.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0960\/5375\/6204\/files\/EMF-OVERSIZED-SET2010-2013.webp?v=1774996730","url":"https:\/\/sheridan-driveline.myshopify.com\/products\/emf-7467l-1-7460-1-kit-oversized-2010-13-ram-2500-3500","provider":"Sheridan Driveline","version":"1.0","type":"link"}